Warning:
The TiePieSCOPE HS801 is no longer manufactured and sold.
For an overview of all oscilloscopes, visit the Oscilloscopes page.
The TiePieSCOPE HS801 is no longer manufactured and sold.
For an overview of all oscilloscopes, visit the Oscilloscopes page.
Software will remain available through this web site, but it will no longer be updated.
The TiePieSCOPE HS801 is an instrument with parallel port connection. The TiePieSCOPE HS801 will only work on a computer with a real parallel port. Connection via a third party USB to parallel adapter will not work.
Specifications
The tables below show detailed specifications of the TiePieSCOPE HS801.
Acquisition system | |
|---|---|
| Number of input channels | 2 analog, BNC |
| Resolution | 8 bit |
| Accuracy | 1% of full scale ± 1 LSB |
| Ranges | 100 mV to 80 V full scale |
| Coupling | AC/DC |
| Impedance | 1 MOhm / 30 pF |
| Protection | 200 V (DC + AC peak < 10 kHz) |
| Bandwidth (-3dB) | DC to 50 MHz maximum |
| AC coupling cut off frequency (-3dB) | ±1.5 Hz |
| Maximum sampling rate | one channel : 100 MHz, 10 ns two channel : 50 MHz, 20 ns |
| Sampling clock source | internal ±0.01%, external |
| Memory | 65536 samples each channel |
Arbitrary Waveform Generator (independent from acquisition system) | |
| Number of output channels | 1 analog, BNC |
| Resolution | 10 bit @ 25 MHz |
| Amplitude | -12 V to 12 V |
| Amplitude step | 0 to ±0.1 V range, 1024 steps ±0.1 to ±0.9 V range, 1024 steps ±0.9 to ±12 V range, 1024 steps |
| Coupling | DC |
| Impedance | 50 Ohm |
| Bandwidth | DC to 2MHz |
| DC level | 0 to ±12 V in 1024 steps |
| Maximum sampling rate | 25 MHz |
| Sampling source | internal, 0.01% |
| Memory | 1024 points in DDS mode 65536 points in linear mode |
| Waveforms | sine, triangle, square, DC, noise and user defined |
| Symmetry | 1 to 99%, 1% steps |
Trigger system | |
| System | digital, 2 levels |
| Source | CH1, CH2, AND, OR, analog external, digital external |
| Trigger modes | rising edge, falling edge, inside window, outside window, TV line, TV frame |
| Level adjustment | 0 to 100% of full scale |
| Hysteresis adjustment | 0 to 100% of full scale |
| Resolution | 0.39% (8 bits) |
| Pre trigger | 0 to 65535 samples (0 to 100%, one sample resolution) |
| Post trigger | 0 to 65535 samples (0 to 100%, one sample resolution) |
| Analog external trigger | |
| Input | BNC |
| Ranges | 100 mV to 80 V full scale |
| Coupling | AC/DC |
| Bandwidth | 10 MHz |
| Digital external trigger | |
| Input | extension connector |
| Ranges | 0 to 5 V (TTL) |
| Coupling | DC |
Square Wave Generator (only on models without Arbitrary waveform generator) | |
| Number of output channels | 1, BNC |
| Waveforms | Square wave |
| Frequency range | 100 Hz to 100 kHz |
| Output amplitude | ±2 V (4 V peak to peak) |
| Impedance | 400 Ohm |
| Coupling | DC |
Interface | |
| Interface | LPT |
Power Requirements | |
| Power from AC source | 90 to 260 V 50/60 Hz (10 W max) |
| Power from DC source | 12 to 24 V (10 W max) |
System Requirements | |
| PC I/O connection | parallel port |
| Operating System | Windows 95/98/ME/2000/XP |
Physical | |
| Instrument height | 60 mm (2.4 inch) |
| Instrument length | 325 mm (12.8 inch) |
| Instrument width | 175 mm (6.9 inch) |
| Cord length | 1.8 m (70 inch) |
| Weight | 1700 g (60 ounce) |
| Accessories | 2 oscilloscope probes 1:1 / 1:10 switchable powerline cord parallel interface cable |
Downloads
Download the software, drivers, manuals and source code for the TiePieSCOPE HS801.
Software & Drivers
| Description | Version | Remarks | Size | |
|---|---|---|---|---|
| LPT/ISA Driver (GiveIO.sys) | Windows NT4 / 2000 / XP, 32 bit | 247.57 kB | download | |
| TiePieSCOPE HS801 USB to parallel adapter driver | 1.30.0.1 | Windows 98 / ME / 2000 / XP, 32 bit | 369.23 kB | download |
| TiePieSCOPE HS801 WinSoft measurement software (32 bit) | 2.87 | Windows 95/98/ME/NT4/2000/XP | 2.04 MB | download |
| TiePieSCOPE HS801 WinSoft measurement software (16 bit) | 2.31 | Windows 3.xx | 2.19 MB | download |
| TiePieSCOPE HS801 DOS Measurement software | 1.0 | DOS protected mode, English | 281.97 kB | download |
Manuals
Programming
| Description | Version | Remarks | Size | |
|---|---|---|---|---|
| TiePieSCOPE HS801 Instrument DLL (32 bit) | 2.90 | Windows 95/98/ME/NT4/2000/XP | 473.13 kB | download |
| TiePieSCOPE HS801 Instrument DLL (16 bit) | Windows 3.xx | 107.79 kB | download | |
| Borland C++ Builder example | 18.53 kB | download | ||
| Borland Delphi example | 15.38 kB | download | ||
| DasyLab driver | For all TiePie measuring instruments | 259.46 kB | download | |
| Instrument DLL programmer's manual | 1.29 | English | 331.35 kB | download |
| Matlab example | for Matlab 6.5.1 and higher | 2.80 kB | download | |
| Python binding for instrument DLL | 1.7 | for Python 2.7 (Windows 32 bit) | 200.51 kB | download |
| Python examples | 1.7 | 4.90 kB | download | |
| Visual Basic 6 example | 12.84 kB | download |
