Warning:
The Handyprobe HP2 is no longer manufactured and sold.
The Handyprobe HP3 replaces the Handyprobe HP2.
For an overview of all oscilloscopes, visit the Oscilloscopes page.
The Handyprobe HP2 is no longer manufactured and sold.
The Handyprobe HP3 replaces the Handyprobe HP2.
For an overview of all oscilloscopes, visit the Oscilloscopes page.
Software will remain available through this web site, but it will no longer be updated.
The Handyprobe HP2 is an instrument with parallel port connection. The Handyprobe HP2 will only work on a computer with a real parallel port. Connection via a third party USB to parallel adapter will not work.
Specifications
The tables below show detailed specifications of the Handyprobe HP2.
Acquisition system | |||||
|---|---|---|---|---|---|
| Analog input channels | 1, probe tip | ||||
| Resolution | 8 bit = 0.39% | ||||
| Accuracy | 1% of full scale ± 1 LSB | ||||
| Ranges | 0.5 V to 400 V full scale | ||||
| Coupling | AC/DC | ||||
| Impedance | 1 MOhm / 30 pF | ||||
| Protection | 500 V | ||||
| Bandwidth (-3dB) | DC to 2 MHz maximum | ||||
| AC coupling cut off frequency (-3 dB) | ± 1.5 Hz | ||||
| Maximum sampling rate | HP2-20 | HP2-10 | HP2-5 | HP2-2 | HP2-1 |
| 20 MSa/s, 50 ns | 10 MSa/s, 100 ns | 5 MSa/s, 200 ns | 2 MSa/s, 500 ns | 1 MSa/s, 1 µs | |
| Sampling clock source | internal | ||||
| Accuracy | 0.01% | ||||
| Stability | ±100 ppm over -40°C to +85°C | ||||
| Memory | 65536 points | ||||
Trigger system | |||||
| System | digital, 2 levels | ||||
| Source | channel, keyboard | ||||
| Trigger modes | rising edge, falling edge, inside window, outside window | ||||
| Level adjustment | 0 to 100% of full scale | ||||
| Hysteresis adjustment | 0 to 100% of full scale | ||||
| Resolution | 0.39% (8 bits) | ||||
| Pre trigger | 0 to 65535 samples (0 to 100%) | ||||
| Post trigger | 0 to 65535 samples (0 to 100%) | ||||
Interface | |||||
| Interface | LPT | ||||
Power Requirements | |||||
| Power from LPT port | 200 mA max (1 W max) | ||||
Physical | |||||
| Instrument height | 22 mm (0.8 inch) | ||||
| Instrument length | 125 mm (4.9 inch) | ||||
| Instrument width | 43 mm (1.7 inch) | ||||
| Cord length | 1.8 m (70 inch) | ||||
| Weight | 260 g (9.2 ounce) | ||||
I/O connectors | |||||
| Channel 1 in | probe tip | ||||
| Channel 1 ground | 13 cm wire with isolated crocodile clip | ||||
| parallel port | fixed cable with 25 pin male D-Sub connector | ||||
System requirements | |||||
| PC I/O connection | parallel port | ||||
| Operating system | Windows 95/98/NT4/2000/ME/XP | ||||
Certifications and compliences | |||||
| CE mark compliance | Yes | ||||
Package | |||||
| Instrument | Handyprobe HP2 | ||||
| Software | Windows 95/98/NT4/2000/ME/XP | ||||
| Manuals | instrument manual and software user's manuals color printed on paper and digital | ||||
Options | |||||
| Optionally available | banana sockets instead of probe tip and ground wire | ||||
Downloads
Download the software, drivers, manuals and source code for the Handyprobe HP2.
Software & Drivers
| Description | Version | Remarks | Size | |
|---|---|---|---|---|
| Handyprobe HP2 USB to parallel adapter driver | 1.30.0.1 | Windows 98 / ME / 2000 / XP, 32 bit | 369.46 kB | download |
| LPT/ISA Driver (GiveIO.sys) | Windows NT4 / 2000 / XP, 32 bit | 247.57 kB | download | |
| Handyprobe HP2 WinSoft measurement software (32 bit) | 2.87 | Windows 95 / 98 / ME / NT4 / 2000 / XP | 1.94 MB | download |
| Handyprobe HP2 WinSoft measurement software (16 bit) | 2.30 | Windows 3.xx | 2.12 MB | download |
| Handyprobe HP2 DOS Measurement software | 1.0 | DOS protected mode, English | 266.25 kB | download |
Manuals
Programming
| Description | Version | Remarks | Size | |
|---|---|---|---|---|
| Handyprobe HP2 Instrument DLL (32 bit) | 2.90 | Windows 95/98/ME/NT4/2000/XP | 458.58 kB | download |
| Handyprobe HP2 Instrument DLL (16 bit) | Windows 3.xx | 98.34 kB | download | |
| Borland C++ Builder example | 18.53 kB | download | ||
| Borland Delphi example | 15.38 kB | download | ||
| DasyLab driver | For all TiePie measuring instruments | 259.46 kB | download | |
| Instrument DLL programmer's manual | 1.29 | English | 331.35 kB | download |
| Matlab example | for Matlab 6.5.1 and higher | 2.80 kB | download | |
| Python binding for instrument DLL | 1.7 | for Python 2.7 (Windows 32 bit) | 200.51 kB | download |
| Python examples | 1.7 | 4.90 kB | download | |
| Visual Basic 6 example | 12.84 kB | download |
