Warning:
The Handyscope HS1 is no longer manufactured and sold.
The Handyscope HS5 replaces the Handyscope HS1.
For an overview of all oscilloscopes, visit the Oscilloscopes page.
The Handyscope HS1 is no longer manufactured and sold.
The Handyscope HS5 replaces the Handyscope HS1.
For an overview of all oscilloscopes, visit the Oscilloscopes page.
Software will remain available through this web site, but it will no longer be updated.
There is and will be no Windows based software available for the Handyscope HS1, because the instrument is not suited for operation in a multitasking environment.
Software for the Handyscope HS2 will not operate with the Handyscope HS1.
Specifications
The tables below show detailed specifications of the Handyscope HS1.
Acquisition system | |
|---|---|
| Number of input channels | 2 analog, BNC |
| Resolution | 12 bits = 0.025% |
| Accuracy | 0.25% of full scale ± 1 LSB |
| Ranges | 500 mV to 20 V full scale |
| Coupling | AC/DC, manual with switches on the front |
| Impedance | 1 MOhm / 20 pF |
| Protection | 1:1 probe : 200 V AC 50 Hz 1:10 probe : 600 V AC 50 Hz |
| Bandwidth (-3dB) | DC to 50 kHz maximum |
| AC coupling cut off frequency (-3dB) | ±1.5 Hz |
| Maximum sampling rate | 80 kHz on one channel, 40 kHz on two channels |
| Sampling clock source | software, ±5% |
| Memory | - |
Trigger system | |
| System | software, 2 levels |
| Source | CH1, CH2, keyboard |
| Trigger modes | rising edge, falling edge |
| Level adjustment | 0 to 100% of full scale |
| Hysteresis adjustment | 0 to 100% of full scale |
| Resolution | 0.39%, 8 bits |
| Pre trigger | - |
| Post trigger | - |
Interface | |
| Interface | LPT |
Power requirements | |
| Power from LPT port | 120 mA max (0.6 W max) |
Physical | |
| Instrument height | 40 mm (1.5 inch) |
| Instrument length | 145 mm (5.7 inch) |
| Instrument width | 85 mm (3.3 inch) |
| Cord length | 1.7 m (67 inch) |
| Weight | 350 g (12.3 ounce) |
| Accessories | 2 oscilloscope probes 1:1 / 1:10 switchable |
Downloads
Download the software, manuals and source code for the Handyscope HS1.
Software
Manuals
Programming
| Description | Version | Remarks | Size | |
|---|---|---|---|---|
| DOS source code archive | Basic / C / Pascal | 179.18 kB | download |
