The TE6100 is no longer manufactured and sold.
For an overview of all oscilloscopes, visit the Oscilloscopes page.
Software will remain available through this web site, but it will no longer be updated.
Specifications
The tables below show detailed specifications of the TE6100. Jump to Acquisition system, Interface, Power Requirements or Physical.
Acquisition system | |
---|---|
Number of input channels | 2 analog |
CH1, CH2 | BNC |
Type | Single ended |
Resolution | 8 bit @ 50 MHz |
Accuracy | 1 % of full scale ± 1 LSB |
Ranges | ±100 mV to ±80 V full scale |
Coupling | AC/DC |
Impedance | 1 MOhm / 30 pF |
Maximum input voltage (in all ranges) | 200 V (DC + AC peak < 10 kHz) |
Maximum input voltage 1:10 probe (in all ranges) | 600 V (DC + AC peak < 10 kHz) |
Bandwidth (-3dB) | DC to 50 MHz maximum |
AC coupling cut off frequency (-3dB) | ±1.5 Hz |
Maximum sampling rate | 100 MHz, 10 ns (one channel) 50 MHz, 20 ns (two channels) |
Sampling clock source | internal |
Internal | Quartz |
Accuracy | ±0.01 % |
Memory | 64 KiSamples per channel |
Trigger | |
System | Digital, 2 levels |
Source | CH1, CH2, AND, OR, external, external PXI bus |
Trigger modes | Rising edge, falling edge, inside window, outside window, TV |
Level adjustment | 0 to 100 % of full scale |
Hysteresis adjustment | 0 to 100 % of full scale |
Resolution | 0.39 % (8 bits) |
Pre trigger | 0 to 65535 samples, 1 sample resolution |
Post trigger | 0 to 65535 samples, 1 sample resolution |
Digital external trigger | |
Input | BNC |
Range | 0 to 5 V TTL |
Coupling | DC |
Interface | |
Interface | PXI |
Power Requirements | |
Power from PXI bus | 3.5 W max |
Physical | |
Instrument dimensions | PXI, 3U single slot |
Weight | 200 g (7.1 ounce) |
Accessories | 2 x Oscilloscope Probe 1:1-1:10 - HP-3060 |
Ambient temperature | 10 ºC to 35 ºC |
Downloads
Downloads for the TE6100 are listed below.