Warning:
The TiePieSCOPE HS805 is no longer manufactured and sold.
For an overview of all oscilloscopes, visit the Oscilloscopes page.
The TiePieSCOPE HS805 is no longer manufactured and sold.
For an overview of all oscilloscopes, visit the Oscilloscopes page.
Software will remain available through this web site, but it will no longer be updated.
Specifications
The tables below show detailed specifications of the TiePieSCOPE HS805. Jump to acquisition specifications, function generator specifications or general specifications.
Acquisition system | |
|---|---|
| Number of input channels | 2 analog |
| CH1, CH2 | BNC |
| Type | Single ended |
| Resolution | 8 bits |
| Amplitude accuracy | 1 % of full scale |
| Offset accuracy | 1 % of full scale |
| Ranges | 200 mV to 80 V full scale in a 2 - 4 - 8 sequence |
| Coupling | AC/DC |
| Impedance | 1 MOhm // 20 pF |
| Maximum input voltage (in all ranges) | 200 V (DC + AC peak < 10 kHz) |
| Maximum input voltage with 1:10 probe (in all ranges) | 600 V (DC + AC peak < 10 kHz) |
| Bandwidth (-3dB) | 250 MHz |
| AC coupling cut off frequency (-3dB) | 1.5 Hz |
| Rise time | 1.5 ns |
| Overshoot | 1 % |
| Maximum sampling rate | 1 GSa/s (one channel) 500 MSa/s (two channels) |
| Sampling clock source | internal, external |
| Internal | quartz |
| Accuracy | ±0.01 % |
| Stability | ±100 ppm over -40°C to +85°C |
| External | LVDS, on extension connector |
| Memory | 32 Mpts per channel |
| Trigger | |
| System | digital, 2 levels |
| Source | CH1, CH2, AND, OR, Analog external, Digital external |
| Trigger modes | rising edge, falling edge |
| Level adjustment | 0 to 100 % of full scale |
| Hysteresis adjustment | 0 to 100 % of full scale |
| Resolution | 0.39 % (8 bits) |
| Pre trigger | 0 to 32 MiSamples (0 to 100 %, 1 sample resolution) |
| Post trigger | 0 to 32 MiSamples (0 to 100 %, 1 sample resolution) |
| Analog external trigger | |
| Input | BNC |
| Range | 200 mV to 80 V full scale |
| Coupling | AC/DC |
| Bandwidth | 20 MHz |
| Maximum input voltage (in all ranges) | 200 V (DC + AC peak < 10 kHz) |
| Digital external trigger | |
| Input | extension connector |
| Range | 0 to 5 V (TTL) |
| Coupling | DC |
Arbitrary Waveform Generator (independent from acquisition system) | |
| Waveforms | Sine, Square, Triangle, DC, Noise, Arbitrary |
| Output channel | 1 analog, BNC |
| DAC resolution | 14 bits @ 200 MHz |
| Output range | -12 to +12 V |
| Amplitude | |
| Range | 0 to 0.12 V, 0.12 to 1.2 V, 1.2 to 12 V |
| Resolution | 12 bit |
| DC offset | |
| Range | -12 to 12 V |
| Resolution | 12 bit |
| Coupling | DC |
| Impedance | 50 Ohm |
| Bandwidth | DC to 20 MHz |
| System characteristics | |
| System | DDS |
| Memory | 32 MiSamples |
| Maximum sampling rate | 200 MHz |
| Sampling clock source | internal, 0.01 % |
| Accuracy | ±0.01 % |
| Stability | ±100 ppm over -40 °C to +85 °C |
Interface | |
| Interface | USB 2.0 High Speed (480 Mbit/s) (USB 1.1 Full Speed (12 Mbit/s) and USB 3.0 compatible) |
Power Requirements | |
| Power adapter | External |
| Input | 110 to 240 VAC, 50 to 60 Hz 0.85 A Max., 50 VA to 80 VA |
| Output | 5 VDC, 1.5 A 12 VDC, 1.5 A |
| Dimension | 33 x 58 x 102 mm / 1.3 x 2.3 x 4 inch (h x w x l) |
| Consumption | 5 VDC, 1500 mA max 12 VDC, 1500 mA max |
Physical | |
| Instrument height | 57 mm (2.3 inch) |
| Instrument length | 276 mm (10.9 inch) |
| Instrument width | 180 mm (7.1 inch) |
| Weight | 1250 g (2.8 lbs) |
| USB cable length | 1.2 m (47 inch) |
| Power cord length | 1.5 m (59 inch) |
I/O connectors | |
| Ch1, Ch2 | BNC |
| Generator out | BNC |
| Analog external trigger input | BNC |
| Power | 5 pin Mini-DIN socket |
| USB | type B socket |
| Extension connector | D-Sub 15 pins female |
System Requirements | |
| PC I/O connection | USB 2.0 High Speed (480 Mbit/s) (USB 1.1 Full Speed (12 Mbit/s) and USB 3.0 compatible) |
| Operating System | Windows 98/ME/2000/XP/Vista/7/8/10 |
Operating Environment | |
| Ambient temperature | 0 to 55 °C |
| Relative humidity | 10 to 90 % non condensing |
Storage Environment | |
| Ambient temperature | -20 to 70 °C |
| Relative humidity | 5 to 95 % non condensing |
Certifications and Compliances | |
| CE mark compliance | Yes |
| RoHS | Yes |
Package | |
| Instrument | TiePieSCOPE HS805 |
| Oscilloscope probes | 2 x Oscilloscope Probe 1:1-1:10 - HP-9250 |
| Software | Windows 98/2000/ME/XP/Vista/7/8/10 |
| Drivers | Windows 98/2000/ME/XP/Vista/7/8/10 |
| Manual | instrument manual and software user manuals color printed on paper and digital |
Downloads
Downloads for the TiePieSCOPE HS805 are listed below.
Driver & Software
| Description | Version | Remarks | Size | |
|---|---|---|---|---|
| TiepieSCOPE HS805 USB driver | 6.0.7.0 | Windows 98 / ME / 2000 / XP / Vista / 7 / 8, 32 and 64 bit | 496.68 kB | download |
| Final Multi Channel software for TiePieSCOPE HS805 | 1.33.2 | Windows XP / Vista / 7 / 8 / 10, 32 bit, for instrument USB driver 6.0.7 / 6.0.8 / 6.1.3 | 26.68 MB | download |
Manuals & Documents
Programming
| Description | Version | Remarks | Size | |
|---|---|---|---|---|
| TiePieSCOPE HS805 Instrument DLL (32 bit) | 1.30.0 | For 32 bit applications on Windows 98/ME/2000/XP/Vista/7/8/10 (32/64 bit) | 1.06 MB | download |
| TiePieSCOPE HS805 Instrument DLL (64 bit) | 1.30.0 | For 64 bit applications on Windows XP/Vista/7/8/10 (64 bit) | 2.07 MB | download |
| Borland C++ Builder example | 18.53 kB | download | ||
| Borland Delphi example | 15.38 kB | download | ||
| DasyLab driver | For all TiePie measuring instruments | 259.46 kB | download | |
| Instrument DLL programmer's manual | 1.29 | English | 331.35 kB | download |
| Matlab example | for Matlab 6.5.1 and higher | 2.80 kB | download | |
| Matlab streaming example | for Matlab 6.5.1 and higher with callback adapter | 7.11 kB | download | |
| Python binding for instrument DLL | 1.7 | for Python 2.7 (Windows 32 bit) | 200.51 kB | download |
| Python binding for instrument DLL | 1.7 | for Python 2.7 (Windows 64 bit) | 228.16 kB | download |
| Python examples | 1.7 | 4.90 kB | download | |
| Visual Basic 6 example | 12.84 kB | download |
