Warning:
The µScope is no longer manufactured and sold.
The Handyprobe HP3 replaces the µScope.
For an overview of all oscilloscopes, visit the Oscilloscopes page.
The µScope is no longer manufactured and sold.
The Handyprobe HP3 replaces the µScope.
For an overview of all oscilloscopes, visit the Oscilloscopes page.
Software will remain available through this web site, but it will no longer be updated.
There is and will be no Windows based software available for the µScope, because the instrument is not suited for operation in a multitasking environment.
Specifications
The tables below show detailed specifications of the µScope.
Acquisition system | |
|---|---|
| Number of input channels | 1 analog, BNC |
| Resolution | 8 bits = 0.39% |
| Accuracy | 1% of full scale ± 1 LSB |
| Ranges | 2.5 V to 20 V full scale |
| Coupling | DC |
| Impedance | 1 MOhm / 25 pF |
| Protection | 40 V (DC + AC peak, 50 Hz) |
| Bandwidth (-3dB) | DC to 40 kHz maximum |
| Maximum sampling rate | 80 kHz, 12.5 µs |
| Sample clock source | software, ±5% |
| Memory | - |
Trigger system | |
| System | software, 2 levels |
| Source | channel, keyboard |
| Trigger modes | rising edge, falling edge |
| Level adjustment | 0 to 100% of full scale |
| Hysteresis adjustment | 0 to 100% of full scale |
| Resolution | 0.39%, 8 bits |
| Pre trigger | - |
Interface | |
| Interface | parallel port |
Power Requirements | |
| Power from LPT port | 20 mA max (100 mW max) |
Physical | |
| Instrument height | 18 mm (0.7 inch) |
| Instrument length | 60 mm (2.4 inch) |
| Instrument width | 54 mm (2.1 inch) |
| Weight | 40 g (1.4 ounce) |
Downloads
Download the software and manuals for the µScope.
Software
| Description | Version | Remarks | Size | |
|---|---|---|---|---|
| µScope DOS Measurement software | 1.0 | DOS protected mode, English | 150.18 kB | download |
