A professional USB oscilloscope
Base price: € 806.00
A 2 channel, 100 MSa/s USB oscilloscope with function generator in a small package.
Acquisition system- 8, 12, 14 and 16 bit resolution, 0.2% DC vertical accuracy
- Up to 100 MSa/s sampling, 50 MHz bandwidth
- 128 KSamples memory per channel
- Up to 2 MHz sine, square, triangular and arbitrary waves
- -12 to 12 V output (24 Vpp)
- 50 MSa/s, 14 bit, 128 KSamples arbitrary waves
- 900 µV RMS noise level
Full specifications Data sheet Manual Request info
- Handyscope HS3-100
- Handyscope HS3-50
- Handyscope HS3-25
- Handyscope HS3-10
- Handyscope HS3-5
- Five year warranty (W5)
Order code:
EAN:
Price:
The Handyscope HS3 is a powerful 100 MSa/s USB oscilloscope that can also be used as a multimeter, spectrum analyzer, data logger or protocol analyzer. This USB oscilloscope also contains a function / arbitrary waveform generator that is able to produce every signal that is needed. Together with the 2 measurement channels this oscilloscope is an excellent measurement tool to troubleshoot circuits.
Continuous streaming
Besides measuring in block mode, the Handyscope HS3 is also capable of performing continuous streaming measurements. This will create a continuous uninterrupted data stream to the computer. The data can then be displayed on the screen and/or saved to disk.
Arbitrary Waveform Generator
The integrated Arbitrary Waveform Generator operates fully independent from the measuring system of the Handyscope HS3. It has a 50 MSa/s sampling clock, a 256K samples deep waveform memory, a 14 bit output resolution and a ± 12 V output range. The arbitrary function generator allows you to generate test signals for your measurements in any shape you like. Several standard signal shapes are available and it is possible to regenerate previously measured signals.
Combining multiple Handyscope HS3s
When one Handyscope HS3 does not offer enough input channels, the Handyscope HS3 can be coupled to one or more other instruments. This allows to make a combined instrument which will enable simultaneous measuring on all channels of all combined instruments.
Versatile Multi Channel oscilloscope software
The Handyscope HS3 is delivered with the versatile Multi Channel oscilloscope software, which transforms the Handyscope HS3 into an oscilloscope, spectrum analyzer, data logger, multimeter and protocol analyzer.
Some of the powerful features of the Multi Channel oscilloscope software are indicated below, for a full description of the Multi Channel oscilloscope software, refer to the Multi Channel oscilloscope software pages.
Touchscreen friendly toolbars
An oscilloscope toolbar and channel toolbars are available for each detected Handyscope. The convenient toolbars provide clear buttons for all settings of the oscilloscope and its channels. They show the current settings of the oscilloscope and allow to change all settings. The large buttons are very suitable for touchscreen operation.
The toolbars are fully configurable through the program settings. You can set the button size, add or remove buttons and change the order of the buttons.
Read more on oscilloscope toolbars... Read more on channel toolbars...
Comprehensive Arbitrary Waveform Generator
To generate your test signals, the Multi Channel oscilloscope software also includes a comprehensive Arbitrary Waveform Generator.
An arbitrary waveform generator is an instrument that can generate repetitive or single shot signals. The signals can have a predefined standard shape like a sine wave or a square wave as in a conventional function generator. However, the signals can also have an arbitrary shape, defined by the user. These signals can be created using the Multi Channel oscilloscope software or an external program or can be signals previously measured by the Handyscope and loaded in the generator.
The Multi Channel oscilloscope software generator can be fully synchronized with the Multi Channel oscilloscope software oscilloscope, using the dedicated generator trigger signals, allowing the scope to trigger on the start of the generated signal, on each new period or on the end of the generated signal.
Flexible signal displays
The Multi Channel oscilloscope software scope, spectrum analyzer and datalogger offer an ultimately flexible way to display all aspects of the measured signals. They can have one or more graphs, each displaying one or more signals, where each graph can display different parts of a signal. Graphs can display the signal(s) of your Handyscope in Yt mode, in XY mode or as frequency spectrum, with or without interpolation. Colors of all items in a graph can be set to any required value. Graph dimensions can be adjusted to any required size, graphs can be located in one single window or in separate windows, which can be located anywhere on the desktop.
Multimeter
The multimeter in the Multi Channel oscilloscope software turns your Handyscope into a multimeter can be used to measure or monitor specific properties of a signal, like True RMS value, frequency, maximum value etc. The Multi Channel oscilloscope software multimeter can have any number of fully configurable displays, either displaying the measured value as a number or using a gauge display. When using a gauge display, it can be very helpful when adjusting a circuit for a specific property, e.g. adjusting an offset to zero.
More features
To discover more features of the comprehensive Multi Channel oscilloscope software for your Handyscope HS3, visit the Multi Channel oscilloscope software pages for a full description.
Handyscope HS3 specifications
The tables below show detailed specifications of the Handyscope HS3. Jump to acquisition specifications, function generator specifications or general specifications.
Acquisition system | |||||
---|---|---|---|---|---|
Number of input channels | 2 analog | ||||
CH1, CH2 | BNC, female | ||||
Type | Single ended | ||||
Resolution | User selectable in software | ||||
Native | 8, 12 bit | ||||
Enhanced | 14, 16 bit | ||||
Accuracy | 0.2 % of full scale ± 1 LSB | ||||
Ranges (Full scale) | ±200 mV ±400 mV ±800 mV | ±2 V ±4 V ±8 V | ±20 V ±40 V ±80 V | ||
Coupling | AC/DC | ||||
Impedance | 1 MΩ / 30 pF | ||||
Noise | 210 µVrms (200 mV range, 12 bit, 50 MSa/s) 50 µVrms (200 mV range, 16 bit, 195 kSa/s) | ||||
Maximum input voltage (in all ranges) | 200 V (DC + AC peak < 10 kHz) | ||||
Maximum input voltage 1:10 probe (in all ranges) | 600 V (DC + AC peak < 10 kHz) | ||||
Bandwidth (-3dB) | DC to 50 MHz maximum | ||||
AC coupling cut off frequency (-3dB) | 1.5 Hz | ||||
Maximum sampling rate | HS3-100 | HS3-50 | HS3-25 | HS3-10 | HS3-5 |
8 bit | 100 MSa/s | 50 MSa/s | 25 MSa/s | 10 MSa/s | 5 MSa/s |
12 bit | 50 MSa/s | 50 MSa/s | 25 MSa/s | 10 MSa/s | 5 MSa/s |
14 bit | 3.125 MSa/s | 3.125 MSa/s | 3.125 MSa/s | 3.125 MSa/s | 3.125 MSa/s |
16 bit | 195 kSa/s | 195 kSa/s | 195 kSa/s | 195 kSa/s | 195 kSa/s |
Maximum streaming rate | 10 kSa/s | ||||
Sampling clock source | |||||
Internal | Quartz | ||||
Accuracy | ±0.01 % | ||||
Stability | ±100 ppm over -40 °C to +85 °C | ||||
Time base aging | ±5 ppm/year | ||||
External | Extension connector | ||||
Memory | |||||
8 bit | 256 Kpts channel | ||||
12, 14, 16 bit | 128 Kpts per channel | ||||
Trigger | |||||
System | Digital, 2 levels | ||||
Source | CH1, CH2, OR, digital external Generator start, Generator new period, Generator stop | ||||
Trigger modes | Rising edge, Falling edge Inside window, Outside window | ||||
Level adjustment | 0 to 100 % of full scale | ||||
Hysteresis adjustment | 0 to 100 % of full scale | ||||
Resolution | 0.025 % (12 bits) | ||||
Pre trigger | 0 to 128 KSamples, 1 sample resolution | ||||
Post trigger | 0 to 128 KSamples, 1 sample resolution | ||||
Digital external trigger | |||||
Input | Extension connector | ||||
Range | 0 to 3.3 V (5 V max) | ||||
Coupling | DC | ||||
Arbitrary Waveform Generator (independent from acquisition system) | |||||
Waveforms | Sine, triangle, square, DC, noise and arbitrary | ||||
Number of output channels | 1 analog, female BNC | ||||
DAC resolution | 14 bit @ 50 MSa/s | ||||
Output range | -12 V to 12 V | ||||
Amplitude | |||||
Range | 0.12 V | 1.2 V | 12 V | ||
Resolution | 13 bit | ||||
Accuracy | 0.4 % | ||||
DC offset | |||||
Range | -12 V to 12 V | ||||
Resolution | 13 bit | ||||
Coupling | DC | ||||
Impedance | 50 Ω | ||||
Bandwidth | DC to 2 MHz | ||||
Noise level | 0.12 V range 900 µV RMS | 1.2 V range 1.3 mV RMS | 12 V range 1.5 mV RMS | ||
Sweep | - | ||||
System characteristics | |||||
System | DDS | ||||
Memory | 256 KiSamples | ||||
Maximum Sampling rate | 50 MHz | ||||
Sampling source | internal | ||||
Accuracy | ±0.01 % | ||||
Stability | ±100 ppm over -40 °C to +85 °C | ||||
Interface | |||||
Interface | USB 2.0 High Speed (480 Mbit/s); (USB 1.1 Full Speed (12 Mbit/s) and USB 3.0 compatible) | ||||
Power Requirements | |||||
Power from USB port | 500 mA max (2.5 W max) | ||||
Power via external power input / extension connector | 1500 mA max (7.5 W max) | ||||
Minimum voltage | 4.5 VDC | ||||
Maximum voltage (SN# <12941) | 6 VDC | ||||
Maximum voltage (SN# >12941) | 12 VDC | ||||
Physical | |||||
Instrument height | 25 mm (1 inch) | ||||
Instrument length | 170 mm (6.7 inch) | ||||
Instrument width | 140 mm (5.2 inch) | ||||
Cord length | 1.8 m (70 inch) | ||||
Weight | 480 g (17 ounce) | ||||
I/O connectors | |||||
Channel 1, 2 | BNC, female | ||||
Generator | BNC, female | ||||
USB | fixed cable with USB 2.0 and USB 1.1 type A connector | ||||
Extension connector | D-sub 25 pins female | ||||
System requirements | |||||
PC I/O connection | USB 2.0 High Speed (480 Mbit/s); (USB 1.1 Full Speed (12 Mbit/s) and USB 3.0 compatible) | ||||
Operating System | Windows 10 / 11, 64 bits Linux (via libtiepie-hw SDK) | ||||
Operating environment | |||||
Ambient temperature | 0 to 55°C | ||||
Relative humidity | 10 to 90%, non condensing | ||||
Storage environment | |||||
Ambient temperature | -20 to 70°C | ||||
Relative humidity | 5 to 95%, non condensing | ||||
Certifications and Compliances | |||||
CE mark compliance | yes | ||||
RoHS | yes | ||||
Package | |||||
Instrument | Handyscope HS3 | ||||
Oscilloscope probes | 2 x Oscilloscope Probe 1:1-1:10 - HP-3250I | ||||
Accessories | external power cable for second USB port | ||||
Software | for Windows 10 / 11, via website | ||||
Drivers | for Windows 10 / 11, via website | ||||
Software Development Kit | for Windows 10 and Linux, via website | ||||
Manuals | instrument manual and software user's manuals color printed and digital, via website | ||||
Options | |||||
Optionally available | 10 MHz generator output |
The Handyscope HS3 is available in five models with different maximum sampling speeds.
Order code | Max. sampling speed |
---|---|
HS3-AWG-100 | 100 MSa/s |
HS3-AWG-50 | 50 MSa/s |
HS3-AWG-25 | 25 MSa/s |
HS3-AWG-10 | 10 MSa/s |
HS3-AWG-5 | 5 MSa/s |
Available options for the Handyscope HS3 are:
- W5: With the extended warranty option, warranty is five years on parts and labor. Without this option, the models have two years warranty on parts and labor.
The Handyscope HS3 is delivered with:
Instrument | Handyscope HS3 |
---|---|
Probe | 2x Oscilloscope Probe 1:1-1:10 - HP-3250I |
Accessories | external power cable for USB port |
Software | for Windows 10 / 11, via website |
Drivers | for Windows 10 / 11, via website |
Software Development Kit | for Windows 10 / 11 and Linux, via website |
Manuals | instrument manual and software user's manuals color printed and digital, via website |
Several downloads for the Handyscope HS3 are listed below, including Multi Channel oscilloscope software, drivers and manuals.
Driver & Software
Description | Version | Remarks | Size | |
---|---|---|---|---|
WinUSB driver | 10.0.2 | Windows 10 / 11, 64 bit | 1.73 MB | download |
Multi Channel software | 1.47.0 | Windows 10 / 11, 64 bit, including PDF manual | 103.76 MB | download |
Manuals & Documents
Description | Version | Remarks | Size | |
---|---|---|---|---|
Multi Channel software manual | 1.11 | English | 3.13 MB | download |
Handyscope HS3 Instrument manual | 2.49 | English | 457.79 kB | download |
Handyscope HS3 Brochure | English | 3.84 MB | download | |
Handyscope HS3 Data sheet | English | 1.41 MB | download | |
Handyscope HS3 High resolution application note | 1 | English | 973.83 kB | download |
Software Development Kit (SDK)
Interfacing the Handyscope HS3 with third party software and developing own software requires the libtiepie-hw Software Development Kit. Detailed information on the LibTiePie SDK, downloads for Windows and Linux platforms and bindings and programming examples for various programming environments can be found in the libtiepie-hw pages.